Zoning Board of Appeals Meeting 06/16/22

Port Chester OZ Fund III 181 Westchester Avenue Port Chester, NY 10573 Anthony Gioffre III, Esq. Cuddy & Feder, LLP 445 Hamilton Avenue White Plains, NY 10601 On the Premises 140-150 Westchester Avenue in the CD-6 Zoning District, being Section: 142.30, Block: 2, Lot(s): 17 & 65 on the assessment map of the Town of Rye, New York the applicant is requesting area variance relief from the following provisions of the Village of Port Chester Character Based Code: Section 345.405.N.1.v "Lots shall be limited to one curb cut per lot" The applicant is proposing 3 curb cuts Section 345.405.N.2d "Any gates, arms, or booths must be set back at least 20 feet from the Frontage" The applicant proposes to locate its security grills within 20 feet of the Frontage

130 Midland Owner LLC 130 Midland Avenue Port Chester, NY 10573 On the premises 130 Midland Avenue, in the CD-4 Zoning district being Section: 142.53, Block: 1, Lot(s): 5, on the assessment map of the Town of Rye, New York the applicant seeks 7 area variances : (i) maintain the existing driveway width of 52' at the curb, with a slight expansion internally to 57'-6" (whereas 24' is the maximum allowed) (§345.405.A-5); (ii) continue parking in the 2nd lot layer (whereas parking is limited to the 3rd layer in the CD-4 District) (§345.405.A-5); (iii) provide less facade void areas on Floor and Decor building (whereas 20% is required / 2% proposed) (§345.405.A-5); (iv) provide less facade glazing on the Floor and Decor Building (20% of total facade area minimum I 1% proposed) (§345.405.A-5); (v) maintain 86% impervious surfaces on the property in order to comply with contamination "capping" remediation measures (whereas 80% is the maximum) (§345.405.A-5); (vi) maintain no buildings along the Property Frontage (whereas a minimum of 60% must be built out in the CD-4 District) (§345.405.A-5) ; (vii) allow Floor and Decor to use its standard 8' tall logo on the building (whereas a 3' maximum for signs is imposed) (§345.701.B-3).